TheHagrienLAUNCH is a Frac Initiation Sleeve designed for the Toe area of horizontal wells. The high pressure rating gives the operator the ability to test the casing annulus, then increase pressure to hydraulically open the LAUNCH. The too
Mar 16, 2019
The T1017 T-NEMEC Frac Sleeve is designed for selectively stimulating multiple zones in either open or cased hole applications. The T1017 T-NEMEC Frac Sleeve can be used in either vertical or horizontal wells usually in conjunction with the
Mar 16, 2019
The T670 OPTIMA-WS Permanent Packer is a Wireline Set, Seal Bore Packer for isolation and production applications. Hagrienhas designed the OPTIMA-WS with common OPTIMA Series Parts to be able to convert tools between three different styles
Mar 16, 2019
The Hagrien OMEGA-6 Cast Iron Bridge Plug is an economical, fully drillable bridge plug. For applications where 6,000 psi (41MPA) plug is sufficient. The OMEGA-6 is suitable for well abandonment or zone suspension.
Mar 16, 2019
The Hagrien OMEGA-10 Cast Iron Bridge Plug is an economical, fully drillable bridge plug. For applications where 10,000 psi (70MPA) plug is required. The OMEGA-10 is suitable for well abandonment or zone suspension.
Mar 16, 2019
The Hagrien T628 AX-5 Anchor Packer is a tandem set packer used in zone or hole isolation completions. The packer is designed to run above the T629 AX-6 Compression Packer, but can also work above the T670 Optima Permanent Packer Line of to
Mar 16, 2019
TheHagrienT629 AX-6 Single Grip Compression Packer is specifically designed as the lower packer in a zone isolation completion when run with the T628 AX-5 Anchor Packer. This tandem tool system sets with compression, but allows the tubing s
Mar 16, 2019
The AX-1 10K Double Grip Packer can be used in most production, fracturing and injection applications. The tool can be set mechanically using tension or compression and then left set in tension, compression or neutral. This makes the AX-1 t
Mar 16, 2019
Hagriens CS Compression Unloader is for use when running a compression set packer as an additional safe unloading device run above the packer. This provides additional safety to release the packer in a high pressure situation.
Mar 16, 2019
The Hagrien T512 On/Off Tool Stinger is designed to be used with the Target T512 T-2 On/Off Tool Overshot for full disconnection and reconnection with the tubing string. The Stingers are available in multiple tubing and profile sizes and st
Mar 16, 2019
Customer service