The T670 OPTIMA-WS Permanent Packer is a Wireline Set, Seal Bore Packer for isolation and production applications. Hagrienhas designed the OPTIMA-WS with common OPTIMA Series Parts to be able to convert tools between three different styles
Mar 16, 2019
The Hagrien OMEGA-6 Cast Iron Bridge Plug is an economical, fully drillable bridge plug. For applications where 6,000 psi (41MPA) plug is sufficient. The OMEGA-6 is suitable for well abandonment or zone suspension.
Mar 16, 2019
The Hagrien OMEGA-10 Cast Iron Bridge Plug is an economical, fully drillable bridge plug. For applications where 10,000 psi (70MPA) plug is required. The OMEGA-10 is suitable for well abandonment or zone suspension.
Mar 16, 2019
The Hagrien T628 AX-5 Anchor Packer is a tandem set packer used in zone or hole isolation completions. The packer is designed to run above the T629 AX-6 Compression Packer, but can also work above the T670 Optima Permanent Packer Line of to
Mar 16, 2019
TheHagrienT629 AX-6 Single Grip Compression Packer is specifically designed as the lower packer in a zone isolation completion when run with the T628 AX-5 Anchor Packer. This tandem tool system sets with compression, but allows the tubing s
Mar 16, 2019
The AX-1 10K Double Grip Packer can be used in most production, fracturing and injection applications. The tool can be set mechanically using tension or compression and then left set in tension, compression or neutral. This makes the AX-1 t
Mar 16, 2019
Hagriens CS Compression Unloader is for use when running a compression set packer as an additional safe unloading device run above the packer. This provides additional safety to release the packer in a high pressure situation.
Mar 16, 2019
The Hagrien T512 On/Off Tool Stinger is designed to be used with the Target T512 T-2 On/Off Tool Overshot for full disconnection and reconnection with the tubing string. The Stingers are available in multiple tubing and profile sizes and st
Mar 16, 2019
The T512 T-2 On/Off Overshot was designed to disconnect and connect the tubing string from a doublegrip production packer that does not require tension or compression to maintain a pack-off.
Mar 16, 2019
The Target SP-3 Drain Valve is a hydrostatic drain sub that is used to allow the tubing to unload at a predetermined pressure setting. Developed for bottom zone disposal, it may be used in many other configurations.
Mar 16, 2019
Customer service